spec no: dsag0285 rev no: v.4 date: jun/14/2007 page: 1 of 5 approved: wynec checked: joe lee drawn: y.h.chen erp: 1351000376 surface mount display part number: ACSA04-41SURKWA-F01 hyper red features z 0.4inch digit height. z low current operation. z excellent character appearance. z i.c. compatible. z mechanically rugged. z gray face,white segment. z package:400pcs/ reel. z moisture sensitivity level : level 4. z rohs compliant. description the hyper red source color devices are made with ingaalp on gaas substr ate light emitting diode. package dimensions& internal circuit diagram notes: 1. all dimensions are in millimeters (inches), tolerance is 0.25(0.01")unless otherwise noted. 2. specifications are subject to change without notice. 3. the gap between the reflector and pcb shall not exceed 0.25mm.
spec no: dsag0285 rev no: v.4 date: jun/14/2007 page: 2 of 5 approved: wynec checked: joe lee drawn: y.h.chen erp: 1351000376 selection guide note: 1. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (ucd) [1] @ 10ma min. typ. ACSA04-41SURKWA-F01 hyper red (ingaalp) white diffused 8000 26000 common anode, rt. hand decimal. description symbol parameter device typ. max. units test conditions peak peak wavelength hyper red 650 nm i f =20ma d [1] dominant wavelength hyper red 635 nm i f =20ma ? 1/2 spectral line half-width hyper red 28 nm i f =20ma c capacitance hyper red 35 pf v f =0v;f=1mhz v f [2] forward voltage hyper red 1.95 2.5 v i f =20ma i r reverse current hyper red 10 ua v r =5v parameter hyper red units power dissipation 75 mw dc forward current 30 ma peak forward current [1] 185 ma reverse voltage 5 v operating / storage temperature -40c to +85c
spec no: dsag0285 rev no: v.4 date: jun/14/2007 page: 3 of 5 approved: wynec checked: joe lee drawn: y.h.chen erp: 1351000376 hyper red ACSA04-41SURKWA-F01
spec no: dsag0285 rev no: v.4 date: jun/14/2007 page: 4 of 5 approved: wynec checked: joe lee drawn: y.h.chen erp: 1351000376 ACSA04-41SURKWA-F01 recommended soldering pattern (units : mm; tolerance: 0.15) reel dimension tape specifications (units : mm)
spec no: dsag0285 rev no: v.4 date: jun/14/2007 page: 5 of 5 approved: wynec checked: joe lee drawn: y.h.chen erp: 1351000376 packing & label specifications ACSA04-41SURKWA-F01
|
